Decimator Design DMON-12S - 1 to 12 Channel MultiViewer

  • Op bestelling, belt u ons voor de actuele levertijd
€1.450,00 (€1.198,35 Excl. btw)
12 to 1 multi-viewer and 1 to 12 input multiplexer with 2 SDI outputs, 1 HDMI output and GPIO interface...Meer informatie
+31 (0) 316 294 700
Scherpe offertes
Passend advies
Maatwerk en Service
Product informatie

This multi-viewer can also be used as an input multiplexer. It is used to display up to 12 3G-/HD-/SD-SDI input signals on a single screen. All important settings can be made with the buttons on the top and checked on the LC display. There are many ways to enable resp. disable overlays and customize the view to your needs.

 

  • Support for 3G level A and level B on the inputs and outputs

 

  • Allowing conversion between 3G-SDI level A and level B

 

  • Simultaneous outputting of the signals on the SDI outputs and the HDMI output

 

  • Deployable as 3G-/HD-/SD-SDI 1 to 12 channel Multi-Viewer or 12 to 1 input multiplexer

 

  • Customizable layouts with various standard layouts

 

  • 16 Character UMD (Under Monitor Display) overlay per window (enable/disable, custom positioning and size)

 

  • 16 Channel Audio Metering overlay per window (enable/disable, custom positioning and size)

 

  • Safe Action and Safe Title overlay per window (enable/disable and adjustment)

 

  • Center Cross overlay per window (enable/disable and adjustment)

 

  • Audio ID overlay

 

  • Load and restore custom layouts

 

  • Fast switching between inputs using full-screen scaling

 

  • Selectable output format in both full-screen and multi-viewer mode

 

  • Low latency buffering for each input allowing non-synchronous inputs

 

  • Support for 26 video formats with automatic detection of input signals

 

  • Each window is independent of the others, allowing any 3G-/HD-/SD-SDI signal format of any frame rate to be displayed simultaneously

 

  • Variable aspect ratios per window

 

  • Pass-Through mode allowing any of the 12 inputs to be selected and routed to any of the two 3G-/HD-/SD-SDI outputs or the HDMI output

 

  • USB port for control and firmware updates

 

  • Most settings can be made using the buttons on the top and checked on the LC display

 

  • Tallies can be applied to either tally boxes (default), outside Safe Action Area or border

 

  • Tally boxes allow up to 4 tallies per window (green, red, blue and yellow)

 

Technische specificaties

    Supported video resolutions and frame rates:

     

    SDI input and output signals:

    • HD:
      1920x1080 progressive at 60 / 59,94 / 50 / 30 / 29,97 / 25 / 24 / 23,98 fps
      1920x1080 PsF at 30 / 29,97 / 25 / 24 / 23,98 fps
      1920x1080 interlaced at 60 / 59,94 / 50 fps
    • HD (720):
      1280x720 progressive at 60 / 59,94 / 50 / 30 / 29,97 / 25 / 24 / 23,98 fps
    • SD:
      525 lines at 29,97 fps (NTSC), 625 lines at 25 fps (PAL)

     

    HDMI output signals:

    • HD:
      1920x1080 progressive at 60 / 59,94 / 50 / 30 / 29,97 / 25 / 24 / 23,98 fps
      1920x1080 interlaced at 60 / 59,94 / 50 fps
    • HD (720):
      1280x720 progressive at 60 / 59,94 / 50 / 30 / 29,97 / 25 fps
    • SD:
      525 lines at 29,97 fps (NTSC), 625 lines at 25 fps (PAL)

     

    Connections:

     

    Inputs:

    • 12x 3G-/HD-/SD-SDI input with automatic detection of the format

     

    Outputs:

    • 2x 3G-/HD-/SD-SDI, BNC
    • 1x HMDI, Typ A

     

    Other links:

    • 1x GPI (General Purpose Interface)
    • 1x USB port for control and firmware updates

     

    General product information:

    • Dimensions (WxHxD): 10,37 x 2,95 x 22 cm
    • Power supply: DC 5 - 32 V (with power supply unit)

In de doos

  • 1x 32 GPI to D-Sub 37-pin adapter (for tallies and remote switching)
  • 1x RS422/485 to D-Sub 37-pin adapter (for dynamic UMD and tallies)
  • 1x Power supply unit
  • 1x HDMI cable
  • 1x USB cable