Magewell USB Capture HDMI Gen 2
Capture or stream an HDMI signal over USB 3.0 with the Magewell USB Capture HDMI Gen 2. With its HDMI v1.4a input, this capture device supports resolutions up to 1920 x 1200 at 60p. If you want to stream or record at a specific resolution, the USB Capture HDMI will internally convert the input signal to the selected resolution. It can also perform real-time frame-rate conversion and deinterlacing with its own hardware, reducing the processing load on your computer's CPU.
Because USB Capture HDMI uses your computer's existing drivers, the capture device will work with any software that supports these drivers. If you don't have a USB 3.0 port available, USB Capture HDMI will also work with a USB 2.0 port, although the resolution and frame rate will be lower due to limited bandwidth.
No drivers needed for Windows, Mac or Linux
Automatically determines the input video format and converts it to the specified output size and frame rate.
Automatically converts input audio formats to 48 KHz PCM stereo audio.
64MB of DDR2 onboard memory to manage the frame buffer and prevent interruptions or dropped frames when USB bandwidth is busy.
1x Magewell USB Capture HDMI Gen 2
1x USB 3.0 Cable
Host Interface | USB 3.0, 300-350MB/s throughput |
HDMI Input | HDMI 1.4a standard, and support up to 1080p/60Hz 8-bit, (RGB, YUV) |
Output Resolutions | Resolutions: 640×480 / 720×480 / 720×576 / 768×576 / 800×600 / 1024×768 / 1280×720 / 1280×800 / 1280×960 / 1280×1024 / 1368×768 / 1440×900 / 1600×1200 / 1680×1050 / 1920×1080 / 1920×1200 / 640×360 / 856×480 / 960×540 / 1024×576 |
Sampling Rate | HDMI: 165 MHz |
USB Standard | Meets the standards of UVC (USB video class) and UAC（USB audio class） |
Color Space | YUY2, RGB24 |
Scaling | Hardware based |
Image Adjustment | Brightness, contrast, hue, saturation |
Operating System | Windows 7 (x86 and x64 version) |
Software Compatibility | Windows Media Encoder (Windows) Adobe Flash Media Live Encoder (Windows, OS |
APIs | DirectShow (Windows), DirectSound (Windows),V4L2 (Linux), ALSA (Linux) |
Onboard Memory | 64MB DDR2, 16 bits at 300 MHz |
Upgradeable Firmware | Yes |
Power Consumption | <= 2.5W |
Operating Temperature | 32 to 122°F / 0 to 50°C |
Storage Temperature | -4 to 158°F / -20 to 70°C |
Relative Humidity | 5 - 90% |
Dimensions | 3.3 x 1.7 x 0.5" / 84 x 43 x 13 mm |
