Magewell Pro Convert for NDI to HDMI
The Magewell Pro Convert for NDI to HDMI converts a live NDI stream with embedded audio to an HD HDMI signal. Decode NDI streams up to 2K 60fps to HDMI output up to 4096x2160 60fps with ultra-low latency.
Pro Convert decoders support both dedicated video-over-IP and universal streaming protocols, including NDI, SRT (Secure Reliable Transport), RTMP, RTSP, RTP, UDP, HTTP and HLS, allowing high-quality conversion of full NDI, NDI|HX, H. 264 (AVC) or H.265 (HEVC) streams to high-quality HDMI or SDI output.
Pro Convert decoders are compatible with a wide range of hardware and software encoders and transform input streams up to 4096x2160 at 60 fps for output to monitors, projectors, hardware switchers and more. They are perfect for multi-location video distribution, video walls, image magnification (IMAG), digital signage, remote production and video surveillance.
- Convert a live NDI stream into an HD HDMI signal
- Connect presentation or distribution equipment to IP-based media networks
- Decodes Full NDI and NDI|HX, including previous variants, to HD HDMI
- Up-converts the decoded HD signals to 4K for display on Ultra HD displays
Magewell Pro Convert NDI to HDMI Decoder
Power Adapter
L-Bracket
USB Cable
Inputs/Outputs
Video Inputs | 1x RJ45 (NDI) Female |
Video Outputs | 1x HDMI (HDMI 2.0/DVI) Female |
Other I/O | 1x USB-B Control Input (Shared Power) |
Format Support
Input Video Format | RJ45 (4:4:4/4:2:2 RGB, YUV) |
Output Video Format | HDMI |
Standards
EDID Support | Manual Control |
HDR Support | Not Specified by Manufacturer |
Hardware
Tally Light | Yes |
Wireless | No |
Power
Power I/O | 1x USB-B (5 VDC at 2.1 A) Input |
PoE Support | PoE 802.3af |
Power Consumption | Device: 1.1A 5W |
Environmental
Operating Temperature | 32 to 77°F / 0 to 45°C |
Storage Temperature | -4 to 158°F / -20 to 70°C |
Operating Humidity | 5 to 90% |
General
Dimensions | 3.98 x 2.36 x 0.91" / 10.1 x 6 x 2.3 cm |
