KRAMER - KDS-8 Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Copper

  • Supplier stock, 1 - 3 business days
€2.399,00 (€1.982,64 Excl. tax)
User configured as encoder or decoder
Max resolution — [email protected] (4:4:4)
Fully standard and compliant SDVoE codec.
Streaming Support — Multicast, Unicast, RTP over RTSP
Powered by the network (PoE)
Video wall and multiview support...More information
+31 (0)316 294700
Great deals
Professional advice
Tailored Services
Product information

KDS−8 is a high−performance, zero latency, [email protected] (4:4:4) video streaming transceiver for streaming via Ethernet over copper cable. KDS−8 can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI input along with IR, RS−232, and analog audio, over an IP network. As a decoder, it receives the encoded signal and decodes it for output. 

 

FEATURES 

 

  •  High–Performance Video Streaming Transceiver — Streams up to [email protected] (4:4:4) resolution signals over a 10G network interface, providing lossless compression. 
  •  Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms. 
  •  HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support 
  •  High–Speed 10G Network Switch — Managed switch provides: multicast, jumbo frames, IGMP snooping and fast leave. 
  •  Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal. 
  •  Bi–directional IR over IP — Control an IR device located on the decoder side from the encoder and vice versa. 
  •  Bi–directional RS–232 over IP — Control a serial device located on the decoder side from the encoder and vice versa. 
  •  Video Wall Support. 
  •  Multiview Support 
  •  Easy, Cost–Effective Maintenance — LED indicators for main power, Tx/Rx mode setting, HDMI video source detection, and Tx and Rx transmission enable easy local maintenance and troubleshooting. 
  •  Simple System Management — Remote system management support to enable quick and efficient remote system and device life–cycle management. 

 

Technische specificaties
     

     

    SPECIFICATIONS 

     

    INPUTS 

    • 1 HDMI: On a female HDMI connector 
    • 1 IR: On a 3.5mm mini jack 

    OUTPUTS 

    • 1 HDMI: On a female HDMI connector 
    • 1 IR: On a 3.5mm mini jack 

    PORTS 

    • 1 10GbE Ethernet: On an R–J45 connector 
    • 1 Unbalanced Stereo Audio: On a 3.5mm mini jack 
    • 1 1GbE Ethernet: On an R–J45 connector 
    • 1 RS-232: On a 3–pin terminal block connector 

    VIDEO 

    • Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0, 

    EXTENSION LINE 

    • Signal Compression: Ultra–light compression, lossless for most content 
    • Range: Up to 100m in point–to–point mode 

    AUDIO 

    • Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources 

    POWER 

    • Source: 12V DC 
    • Consumption: 3A 

    ENVIRONMENTAL CONDITIONS 

    • Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing 
    • Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing 
    • Humidity: 10% to 90%, non–condensing 

    PRODUCT DIMENSION 

    • 23.10cm x 11.60cm x 2.50cm (9.09" x 4.57" x 0.98" ) W, D, H 

    PRODUCT WEIGHT 

    • 0.5kg (1.1lbs) approx. 

    SHIPPING DIMENSION 

    • 35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H 

    SHIPPING WEIGHT 

    • 1.2kg (2.6lbs) approx.