RODE - RØDELink Newsshooter Kit - Digital Wireless System for News Gathering and Reporting

Merk: RODE
  • Niet op voorraad
€484,00 (€400,00 Excl. btw)
The RØDELink Newsshooter Kit consists of a receiver and a XLR transmitter capable of delivering 48V phantom power and with a 3.5mm jack for lavaliers for wireless audio transmission. TX-XLR can run off AA- or NPF batteries....Meer informatie
+31 (0)316 294700
Scherpe offertes
Passend advies
Maatwerk en Service
Product informatie



  • Series II, 2.4GHz digital transmission
  • 128-bit encryption
  • Up to 100 metres range*
  • OLED display (on receiver)
  • One touch pairing
  • Five level gain control
  • AA battery, NP-F battery or USB powered
  • Locking XLR input and headphone output on transmitter
  • Two year extended warranty when you register your microphone


RØDELink represents the next generation of digital wireless systems. Using a Series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Newsshooter Kit provides everything you need to start shooting video wirelessly with XLR microphones, including a camera-mounted receiver and an XLR transmitter. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The transmitter (TX-XLR) easily connects to handheld presentation microphones as well as shotgun microphones, with a 3.5mm input and headphone output.


Technische specificaties


    RØDELink Newsshooter Kit Specifications


    Transmission type

    2.4GHz Fixed Frequency Agile System

    System dynamic range


    Range (distance)

    Up To 100m

    Frequency range

    35Hz - 22kHz

    Maximum output level

    1v Rms (2.8v P-p)

    Max input signal level

    1v Rms (2.8v P-p)

    Max latency


    Receiver (RX-CAM)

    Power source

    2 X AA Battery Or MicroUSB



    Output connection

    3.5mm TRS Locking Jack Socket - Dual Mono

    Output impedance



    111mm X 65mm X 52mm



    Transmitter (TX-XLR)

    Power source

    2 X AA Battery, Sony NP-F Battery Or MicroUSB



    Input connection

    XLR With Locking Collar, 3.5mm TRS Locking Jack Socket

    Input impedance

    1kΩ (XLR), 10kΩ (3.5mm)


    120mm X 45mm X 45mm